Bandwidth DC to 800MHz (-3dB)  
  Attenuation Ratio 1/10  
  Accuracy +/- 2%  
  Rise Time 0.4375ns  
  Input Impedance 100Kohm//2pF each side to ground  
  Input Voltage  
  ˇ@-Differential Range +/- 15V(DC+Peak AC)  
  ˇ@-Common Mode Range +/-30V(DC+Peak AC)  
  ˇ@-Absolute Max. Voltage
(either input to ground) 		+/-40V(DC+Peak AC) CAT I  
  Output Voltage  
  ˇ@- Swing +/-1.5V (into 50ohm load)  
  ˇ@-Offset (typical) <+/-5mV  
  ˇ@-Noise (typical) 0.3mVrms  
  ˇ@-Source Impedance (typical) 50 ohm (for using 50ohm input system oscilloscope)  
  CMRR (typical) -60dB @60Hz, -15dB @500MHz  
  Power Requirements Regulated 15VDC/100mA mains adaptor  
  Ambient Operating Temperature -10 to 40 degree centigrade  
  Ambient Storage Temperature -30 to 70 degree centingrade  
  Ambient Operating Humidity 25 to 85% RH  
  Ambient Storage Humidity 25 to 85% RH  
  Length of BNC Cable 120cm  
  length of Input Leads 50cm  
  Weight 130gms  
  Dimension(LxWxH) 111mm x 22mm x 14mm  
 
 
 
ˇ@* Voltage limit is the lesser of the DC+Peak AC and RMS values.
** a. The supplied voltage must be less than 16V and greater than 3.3V, otherwise the probe could be damaged or canˇ¦t be operated properly.
ˇ@   b.For wrong polarity of power sources, a built-in circuit will protect the probe and no danger or damage will occur.
ˇ@   c. When the voltage of the cells become too low, the power indicator on the panel will change its color and then distinguish.
 
  Features:
ˇEBandwidth up to 200MHz
ˇELow Input Capacitance
ˇEComplete accessories allows easy probing of SMDs

Applications:
ˇEWireless and Data Communication
ˇEDisk Drive Design
ˇECommunication Pulse Shape Compliance
ˇELocation of Ground Bounce

  
 

  Sapphire Instruments Co.,Ltd.         

16F, 866-9, Jung-Jeng Rd., Jung-Ho City, 235 Taipei County, Taiwan, ROC

TEL: 886-2-22250572 (Rep.)     FAX: 886-2-22253412

Email : tina@sapphire.com.tw     Web Site : www.sapphire.com.tw