Bandwidth DC to 50MHz (-3dB)  
  Attenuation Ratio 1/100  
  Accuracy +/- 1%  
  Rise Time 7ns  
  Input Impedance 4Mohm//7pF each side to ground  
  Input Voltage  
  ¡@-Differential Range +/- 700V(DC+Peak AC) or 600Vrms
+/-1400V(DC+Peak AC) or 600Vrms
 
  ¡@-Common Mode Range +/-1400V(DC+Peak AC) or 600Vrms  
  ¡@-Absolute Max. Voltage
(Differential or Common Mode)
+/-1400V(DC+Peak AC) or 6000Vrms CAT II  
  Output Voltage  
  ¡@- Swing +/-7V (into 5kohm load)  
  ¡@-Offset (typical) <+/-1mV  
  ¡@-Noise (typical) 0.3mVrms  
  ¡@-Source Impedance (typical) 50 ohm (for using 1Mohm input system oscilloscope)  
  CMRR (typical) -90dB @60Hz, -55dB @1MHz  
  Power Requirements*  
  ¡@-Options Power leads, Mains adaptor* (6VDC/90mA or regulated 9VDC/70mA), USB power cord  
  Optional Extension Plugs for Mains Adaptor  
  ¡@-Input One jack of 1A current rating.  
  ¡@-Output Three plugs of 1A current rating  
  Ambient Operating Temperature -10 to 40 degree centigrade  
  Ambient Storage Temperature -30 to 70 degree centingrade  
  Ambient Operating Humidity 25 to 85% RH  
  Ambient Storage Humidity 25 to 85% RH  
  Length of BNC Cable 125cm  
  length of Input Leads 50cm  
  Weight 300gms  
  Dimension(LxWxH) 111mm x 22mm x 14mm  
 
 
 
¡@* a. The supplied voltage must be less than 16V and greater than 3.3V, otherwise the probe could be damaged or can¡¦t be operated properly.
¡@   b.For wrong polarity of power sources, a built-in circuit will protect the probe and no danger or damage will occur.
¡@   c. When the voltage of the cells become too low, the power indicator on the panel will dim and then distinguish.
 
  Features:
¡EHigh Accuracy(+/-1%)
¡EBest CMRR in Power Measurement Probes
¡ESmallest Size
¡ESafety Certified

Applications:
¡EPrecise Power Semiconductor Device Measurement
¡ESwitching Power Supply Design
¡EPrecise Measurement of Power Converter
¡EPrecise Measurement of Motor Drive

 
 


  Sapphire Instruments Co.,Ltd.         

16F, 866-9, Jung-Jeng Rd., Jung-Ho City, 235 Taipei County, Taiwan, ROC

TEL: 886-2-22250572 (Rep.)     FAX: 886-2-22253412

Email : tina@sapphire.com.tw     Web Site : www.sapphire.com.tw